A Wooden Wheelbarrow.

 The wheel is made of 6 curved bars which is reinforced and protected by  iron sheets on the outer circumference.  The inner circumference is joint to the central ring with 18 wooden poles using mortises and tenons.The central ring carries a round hole where the axle is positioned. The hole allows the axle to move and rotates without friction when force is applied to the lever.

 The lever contains two long handles which extend all the way to the front of the wheel and joint together using one horizontal post in the front and two horizontal posts in the back. The long handles and the horizontal posts are joint together using exposed tenons.

 On top of the wheel is a ladder like structure that composed of 4 vertical bars that serve as the legs and 8 horizontal bars with 4 on each side stacked up like steps of a ladder. The longest bars are on the top with three struts in between.  This structure is like a cover that goes on top of the wheel resting on the long handles and one of the horizontal posts that go between the handles using tenons and mortises.  In addition, there is a bow-like wood post that bends inward on both ends connecting itself to the front and back horizontal posts that secured the handles.

 The two short legs are inserted to the lower arts of the handles using tenons and mortises joint together using exposed tenons.